•Made of Stainless Steel AISI 304 L with scotch
brite finishing;
•Diffusion and Protection Grid for pre-filter and
HEPA Filter in anodised aluminium;
•Modules MVF2 and MVF3 have a double intake
fan rated to deliver 1.200 Nm³/h at air velocity of
0,45 m/s and at max. pressure of 320 Pascal;
•Module HMVF has a double intake fan rated to
deliver 550 Nm³/h at air velocity of 0,45 m/s and
at max. pressure of 320 Pascal;
•Improved design plenum in negative pressure to
prevent risk that contaminated air might escape by-passing filter and to reduce pressure transition losses, noise level and uneven air velocity profile;
•Outlet for D.O.P. testing;
•Differential manometer outlet;
•Differential pressure switch in each module;
•Module MVF2 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with
dimensions 610x1220x66 mm;
•Module HMVF has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822),
with dimensions 610x610x66 mm;
•Module MVF3 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with
dimensions 915x915x66 mm;
•All MVF modules are provided of prefilter G 3 according EN 779.
•Electrical supply 230 V/50 Hz monophase;
•Maximum power consumption for each module 620W;